CyberHome Entertainment 1600 DVR User Manual


 
27
INSTALLING YOUR DVD RECORDER
5 Check if the time and the date in the page “Clock setting” is correct.
If required, change the displayed settings by pressing the button Cor
Dto increase or decrease the value of the field. You can also use the
number buttons “0-9” instead of the direction keys. Select the next
input field by pressing the button Bor A on the remote control.
If your settings are correct, please press “ENTER” to confirm.
6 The automatic TV channel search progress bar appears and the DVD
recorder scans for available channels. This may take some minutes.
Please wait.
7 When the automatic TV channel search is completed, a message will
be displayed informing you that the setup has been completed! Then
press “ENTER” to finish initial installation.
Problem:
Sound may be distorted on some TV channels:
If the sound is distorted on any of the stored TV channels or if there is no
sound at all, the wrong TV system may have been stored for the TV chan-
nel. Read in section “Manual TV channel search” on page 28 how to
change the TV system.
Problem:
The DVD recorder cannot find any TV channels while searching:
• Select channel 1 on the TV set. Can you see the stored TV channel
on the TV set? If not, check the cable connection from the aerial (aer-
ial socket) to the DVD recorder and to the TV set.
Please have patience! The DVD recorder searches the entire fre-
quency range in order to find and store the largest possible number of
available TV channels. It is possible that the TV channels in your
country are broadcast in a higher frequency range. As soon as this
range is reached during the search, the DVD recorder will find the TV
channels.
If no aerial is connected, cancel the automatic search by pressing
“ENTER” and then, if desired, start the automatic channel search
(see “Automatic TV channel search” on page 29) at a later date.
ENTER
RETURN
//
:
:
5 / 7
Choose OK Back
01 01 2005 00 00 00
ENTER
RETURN
Auto search
78%
Channels found 8
6 / 7
Cancel Back
Completed
Setup has been completed!
Enjoy using your recorder!
7 / 7
OK
Clock setting