Filter
Top Products
CONNECTING THE DVD RECORDER
Connecting the DVD recorder to the TV
For that your DVD recorder can record and play back a TV broadcast, the
necessary cable connections have to be made first. Connect the DVD
recorder directly to the TV. If you connect the DVD recorder through the
video recorder to the TV, there will be the Macrovision copyright protection.
When installing your DVD recorder for the first time, please choose from
the following possibilities:
Connection with SCART cable - Audio and video connection which
enables an optimal picture quality. This connection possibility requires a
SCART cable (not included in your accessory).
Connection with video cable - The most widely used connection. An
audio/video cable for composite video is required (not included in your
accessory).
Connection with S-Video cable -Ahigher quality connection that requires
a special S-Video cable (not included in your accessory) and a S-Video
capable TV.
In detail:
Connection with SCART cable
If your TV has a SCART socket, you can optionally connect your DVD
recorder with the TV over the SCART socket. The advantage is here an
optimal picture quality.
Have the following cables ready:
1. Two aerial cables (not supplied)
2. Power cord (supplied)
3. SCART cable (not supplied)
1 Connect your antenna/cable TV outlet to the “ANTENNAIN” socket at
the back side of your DVD recorder using an aerial cable.
2 Insert one end of a second aerial cable into the “ANTENNA OUT”
socket at the back of your DVD recorder and the other end into the aer-
ial input socket of your TV.
19
123
ANTENNA IN
ANTENNA OUT
Note:
If your TV is already connected to the antenna/cable TV outlet, remove
the aerial cable plug from your TV and insert it into the “ANTENNAIN”
socket at the back side of your DVD recorder.