CyberHome Entertainment 1600 DVR User Manual


 
USER PREFERENCES
Brightness
To adjust the intensity of light emitted. The setting range for the picture
brightness is from -16 to 16. Set the brightness with help of the buttons B
and A and press then “ENTER” to continue.
Contrast
Adjustment of the picture contrast. The contrast is decisive for the overall
display. Light spots should stand out clearly from dark spots without loos-
ing the strength of the picture. The setting range is from -16 to 16. Set the
contrast with help of the buttons Band Aand press then “ENTER” to
continue.
Saturation
To adjust the intensity of the colour in a video picture. The setting range for
the colour saturation is from -16 to 16.Set thesaturationwith helpof the but-
tons Band A and press then “ENTER” to continue. The colours
should be naturally and should not glow exaggeratedly.
Disc related settings
Highlight the menu point you would like to set in the “Disc” setup page.
Please press “ENTER” to enter a menu. Use the button D or C to
select the required disc setting and press “ENTER” or Ato confirm your
selection. To leave a submenu, press the button “RETURN” or B on
your remote control.
Password
In the “Password” menu you can activate or deactivate the password to
control the parental lock. Select “On” to activate the password or “Off” to
deactivate it.
You are prompted for a password. This of course makes sense, as this
option would be useless if your kids could enter the setup menu and dis-
able it! You will be prompted to enter the current existing password. Key in
the password and press “ENTER” to leave this page. If set to “Off” you
will not need to enter a password to make changes to password required
settings such as parental control.
69
Recording
Audio/Video
Disc
General
Help
Brightness
Contrast
Saturation
-01
Recording
Audio/Video
Disc
General
Help
Password On
Change password Off
Parental control
Angle mark
Memory
Note:
If you have not yet set an user password, leave the menu by pressing the
direction key B”. In this case please refer to the next menu “Change
password” to set up a new password.