Filter
Top Products
Page 99 MNNCEKRKB1_0439
6.16 Sensorma tic / American Dynamics Dome
6.16.1 Reference m aterial and documents
Dome Sensormatic DeltaDome II
Rs-422/RS-485 Communication Protocols, 8000-2694-01, Rev.A
6.16.2 Connection
6.16.2.1 Cable
White
Yellow
RS485A
RS485B
RX +
RX -
6.16.2.2 Dome settings
Dome ID-number must be set according to the respective installation manual.
6.16.2.3 Keyboard settings
During Keyboard setup, submenu
must be suitably set:
Baudrate is fixed (4800 baud).
6.16.3 Setup
Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
).
6.16.3.1 OSM Setup
Connect the dome directly to the keyboard and a monitor to the dome video outlet.
The EKR-KB1 keyboard enter in special mode during the dome setup.
start dome setup
The dome show the On Screen Menu; the keyboard shows the change mode in the display:
setup end
Joystick
: cursor movement within the menus
or / : select the submenus
or to increase a value; cursor to the right in text definitions