Filter
Top Products
Page 41 MNNCEKRKB1_0439
5.11.3 Matrix setu p
Connect a camera to input no.1 and a monitor to output no.1, as specified in the video device’s instruction
manual.
Press
to start the setup then insert the setup password if it has been enabled.
Keyboard’s display shows the mode change:
Key : setup end
To maintain compatibility to previous keyboards the usual meaning of EKR-KB1 keys was in a few cases
changed.
The following table shows the indications read on monitor during setup, the corresponding DCS2/KEYPLUS
keys, and the new keys used on EKR-KB1:
On screen menu Meaning DCS2
KEYPLUS
EKR-KB1
numbers 1..9 choice of cameras 1..9
1..9
..
number 0 choice of camera 10
0
numbers 11..16 choice of cameras 11..16
s10..
s16
..
4 (id-text menu only) move cursor up
4
Joystick Up or
9 (id-text menu only) move cursor down
9
Joystick Down or
8 (id-text menu only) move cursor left
8
Joystick Left or
0 (id-text menu only) move cursor right
0
Joystick Right or
PROG PROG key
Q
ENT ENTER key
E
CLR CLEAR key
C
M/A Automatic sequence
M
↑ (arrow up)
previous/increase
U
↓ (arrow down)
next/decrease
D