Filter
Top Products
Page 45 MNNCEKRKB1_0439
5.13.2.4 Operational test
If the keyboard is connected directly with the multiplexer set up in this way using the cable as indicated above, it
should be possible to switch the input videos immediately:
• press
to select multiplexer unit 1
• press
, , to select the input videos.
Each command sent by the keyboard corresponds to the lighting up of an LED on the local multiplexer
keyboard.
Warning! If the number of the multiplexer unit does not coincide with the commands sent from the
keyboard, they will be ignored.
5.13.3 Dedicated f unctions
As well as the normal procedure for selecting input videos, the Javelin multiplexer is equipped with numerous
other functions that can be activated by pressing key combinations, and that correspond to the keys present on
its local keypad.
The
key is used to change the number of the unit responding to the command.
Only some of the functions given below are available for both models of the multiplexer. Refer to the multiplexer
manual for further information.
live record, vcr, spot monitor
select, double select
menu
spot monitor output, auto, full, freeze
“2nd” key, pip1, 2x2, 3x3
4x4, pip2, zoom, 3+4
2+8, set.