Filter
Top Products
Page 58 MNNCEKRKB1_0439
5.19.4 Configurati on
The multiplexer is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
The multiplexer should be configured for RS485 type communication, with an appropriate identification address
and baud rate.
5.19.4.1 OSM Configuration
Connect the multiplexer directly to the keyboard and a monitor to the MONITOR 1 output.
starts multiplexer configuration.
The multiplexer shows the on screen menu; the keyboard display indicates the mode change:
/ : increase and decrease the selected value
start and end of the configuration
equivalent to the NEXT key
equivalent to the BACK key
exits the special mode of configuration
Joystick
: movement within the menus.
5.19.5 Dedicated F unctions
As well as the normal procedure for selecting input videos, the Sanyo multiplexer is provided with numerous
other functions that are activated by pressing key combinations corresponding to the keys on the multiplexer’s
local keypad.
The
key is used to change the number of the unit responding to the command.
control of the master monitor
, ,,control of one spot monitor
5.19.5.1 Multiplexer functions
•
multi
•
quad
•
plus
•
still
•
live
•
vcr
5.19.5.2 Other functions
•
sequence
•
reset alarms