Filter
Top Products
Page 53 MNNCEKRKB1_0439
5.17.4 Configurati on
The DVR is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
The DVR should be configured for RS485 type communication, with an appropriate identification address and
baud rate.
5.17.4.1 OSM Configuration
Connect the DVR directly to the keyboard and a monitor to the MONITOR 1 output.
starts DVR configuration.
The DVR shows the on screen menu; the keyboard display indicates the mode change:
enters the selected submenu
end of configuration
Joystick
: for movement within the menus and changing the values.
5.17.5 Special SEA RCH menu
enters the special SEARCH menu
exits the menu
Joystick
: for movement within the menus and changing the values.
Warning: if the DVR stays in SEARCH mode after exiting the menu, press STOP (
) to return to
normal mode.
5.17.6 Special CO PY menu
enters the special COPY menu
cancels the copy operation and deletes any on screen messages
exits the menu
Warning: the copy operation or, when appropriate, its cancellation by pressing
, should be completed
before exiting the menu
Joystick : for movement within the menus and changing the values.
5.17.7 Dedicated F unctions
As well as the normal procedure for selecting input videos, the SONY DVR is provided with numerous
other functions that are activated by pressing key combinations corresponding to the keys on the
DVR’s local keypad.
The
key is used to change the number of the unit responding to the command.