Filter
Top Products
Page 107 MNNCEKRKB1_0439
6.18.5 Autopan an d tour
Autopan is simulated with a movement between preset positions 1 and 2, thus modifying tour 4. Any previously
stored setup for tour 4 will be lost.
6.18.5.1 Autopan
start autopan
stop autopan
6.18.5.2 Tour
Tour corresponds to patrol. There are 4 tour sequences available.
start tour
When the key is pressed the display will ask for the tour number to be activated:
Insert the tour number (1-4) or 0 to indicate the last tour to
be stopped.
stop tour
set up tour
When the keys are pressed the display will ask for the tour number to be modified::
Insert the tour number (1-4).
When this menu is entered, the tour has been erased.
Choose the line “Add group” as many times as necessary
to redefine the sequence of tour positions.
When the sequence is complete choose “Save and exit”.
Insert the desired position, the scan speed and dwell time
in seconds (when the position is reached). For “Speed”
and “Dwell time”, default values are suggested, but these
can be changed.