Filter
Top Products
Page 114 MNNCEKRKB1_0439
Insert the default dwell time value, from 0 to 60 seconds.
Select “Single dwell time” to set a dwell time when a specific position
is reached.
Insert the position number and dwell time, from 0 to 60 seconds.
6.21.8 Relays
When the activation/deactivation of a relay is requested, the display will always show the message “4 relays
available”. Their number may actually be different, depending on the receiver model that is connected, as
described in the table “Available functions for each receiver model”.
activate/deactivate relays (toggle); when the key is pressed the display will ask for the relay number, from
1 to 4.
activate relay; the display will ask for the relay number
deactivate relay; the display will ask for the relay number
6.21.9 Lenses
Autofocus: on, off
Autoiris:
on, off
6.21.10 Other funct ions
washer on
wiper on
autoflip
“digital flip” on
“digital flip” on