Filter
Top Products
Page 91 MNNCEKRKB1_0439
6.13 Pelco Dom e
6.13.1 Reference m aterial and documents
Dome Spectra II 3.31
Pelco Protocol Manual, “D” Protocol, March 2, 1999
6.13.2 Connection
6.13.2.1 Cable
White
Yellow
RS485A
RS485B
RX+
RX-
6.13.2.2 Dome settings
Dome ID-number must be set according to the respective installation manual.
Protocol must be set as Type ‘D’.
6.13.2.3 Keyboard settings
During Keyboard setup, submenu
must be suitably set:
Baudrate is fixed (2400 baud).
6.13.3 Setup
The dome can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
).
6.13.4 Preset, sca n, home
(1÷32): store the present position as preset position number X
(1÷32): erase previously stored preset position number X
(1÷32): movement towards previously stored position X
: movement towards the Home position, corresponding to preset position 1
: movement towards pan position 0