Filter
Top Products
300 WebSphere Studio Application Developer Programming Guide
Things to do before installation
Before you proceed with installation, please verify that your hardware and
software configuration meets the following prerequisites:
Windows 2000, Windows ME, Windows 98, or Windows NT 4.0 with Service
Pack 6a or higher
Microsoft Internet Explorer 5.5 or higher
TCP/IP installed and configured
A mouse or alternative pointing device
Pentium II processor or higher recommended
SVGA (800x600) display or higher (1024x768 recommended)
256 MB RAM minimum (512 MB recommended)
A minimum of 400 MB free disk space based on NTFS. Actual disk space on
FAT depends on hard disk size and partitioning
Also please check the following before beginning the install:
In addition to the disk space requirements for the product, you need to have
at least 50 MB of space available on your Windows system drive and the TMP
or TEMP environment variable must be pointing to a directory with at least 10
MB free.
If you have the IBM HTTP Server or WebSphere Application Server running,
they need to be shut down.
The Services window should not be open. If it is, the Remote Agent Controller
cannot be installed.
Installing Application Developer
Start the installation by inserting IBM WebSphere Studio Application Developer
Early Availability Version 5 CD-ROM, then select
Install IBM WebSphere Studio
Application Developer
(Figure 12-6) or running SETUP.EXE from the directory
IBM_WS_Application_Developer.
Note: If you have VisualAge for Java or any version of WebSphere Studio
already installed, there is no need to un-install before installing Application
Developer.