Konica Minolta VIVID 9i Universal Remote User Manual


 
122
Chapter
2
File
Menu
300
File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)
5
Click the [Scan] button.
Scan will start, and both color and range im-
ages will be displayed.
The “Next shot? (angle:**)” message dialog
box will also appear.
4
Set optional parameters.
Check the [Option] checkbox, and make nec-
essary parameters.
To set the scan reference position (Distance) and
laser intensity (Laser Intensity), perform the fol-
lowing procedure.
q Check the [Option] checkbox.
w Check the [Manual] checkbox.
e Move the [Distance] bar or [Laser Intensity]
bar to the desired position.
If you are not going to scan both color and range
images at the same time, uncheck the [Auto read]
checkbox.
If the color and range images are not scanned at
the same time, clicking the [Read] button will
capture a color image and display it.
If the type of rotating stage has not been desig-
nated, turn the rotating stage manually to the next
angle displayed in the “Next shot? (angle:**)”
message dialog box.
6
Click the [OK] button.
The next specied angle will appear in [Current
Angle], and the object will be scanned for the
next image.
If a rotating stage has been selected by the Turn-
table, the stage will turn to the next angle and
then the object will be scanned.
To cancel scan, click the [Cancel] button instead
of the [OK] button, and repeat steps 4 to 5.
7
Repeat step 6 until shots from all the
desired angles are captured.
When shots from all the desired angles are
captured, the “Next shot? Please set the
chart.” message dialog box will appear.
If you want to acquire a shot from a certain angle
again, click the angle currently displayed in [Cur-
rent Angle] with the left mouse button, then select
the desired angle from the pull-down menu that
appears.
M
emo
If an angle (rotation step) has been selected at step 3,
necessary steps (angles) to complete 360 degrees will
be displayed in the pull-down menu. However, it is not
necessary to scan at all the angles. You can select neces-
sary steps (angles) only.