Konica Minolta VIVID 9i Universal Remote User Manual


 
216
Chapter
2
Build
Menu
9i
910
900
700
300
Build – Check Polygons – Element
Checking for Illegal Polygons in Element
This command is used to check for illegal polygons among those comprising the selected element.
Operating Procedure
1
From the element list, select one desired
element.
2
From the [Build] menu, select [Check
Polygons] then click [Element].
The [Build-Check Polygons-Element] dialog
box will appear.
The selected element will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
Note
Anerrormessagewillappearifmorethanoneelement
isselected.
3
Check the checkboxes of the param-
eter items to be checked.
4
Click the [OK] button.
Illegal polygons will be detected and the fol-
lowing dialog box will appear.
5
Click the [OK] button.
Only the vertices comprising the illegal poly-
gons will remain selected, the dialog box will
close and the menu will be exited.