Konica Minolta VIVID 9i Universal Remote User Manual


 
179
Chapter
2
Edit
Menu
9i
910
900
700
300
Edit – Recalc LOD
Recalculating the Simplied Display Data
This command is used to recalculate the simplied display data of the element(s) selected in the element list.
Note
Thisfeatureisdisabledifyouhaveset[UseLOD]to“Off”intheFile-Preferencesdialog(DefaultBehaviortab).
M
emo
The simplied display data is displayed, for example, while the camera is dragged. If recalculation is not performed, the
data in effect when the element(s) was simplied lastly will be displayed. If necessary, recalculate the simplied display
data after the data is edited.
Operating Procedure
1
From the element list, select the desired
element.
2
Click [Recalc LOD] on the [Edit] menu.
The simplied display data of the selected ele-
ment will be recalculated.
Note
Anerrormessagemayappeariftheselectedelement
containsanexcessivelysmallnumberofpolygons.