Konica Minolta VIVID 9i Universal Remote User Manual


  Open as PDF
of 270
 
48
Chapter
2
File
Menu
9i
File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)
Parameters for [File-Import-Digitizer-Step Scan] Dialog Box
AF
Executes auto-focus.
Note
ThisparameteriseffectiveonlywhenVIVID9iisconnected.
Distance
Checking this checkbox enables distance setting.
Intensity
Checking this checkbox enables LD and Gain setting.
• LD: Sets the laser power.
• Gain: Sets the gain. The gain cannot be set if the “Standard” scan mode has been selected.
Auto Scan
Checking this checkbox causes scan, store and stage control operations to be automatically　
performed sequentially.
Scan
Performs a scan.
Note
ThisparameteriseffectiveonlywhenVIVID9iisconnected.
Import CDK
Imports the stored data (CDK) that was scanned by the VIVID 9i.
Color Read
Takes a color shot. Clicking this button at the end of scan will take a color shot again and display
the updated color image.
Note
Thisbuttoniseffectiveifthe[UseColor]checkboxischecked.
Edit
Clicking this checkbox enables you to delete the area that is not necessary for threedimensionaliza-
tion by specifying it in the work window using the mouse.
Auto Store
Checking this checkbox performs store operation automatically at the end of scan operation.
Store
Registers the data p resent in the Work window area as store data, puts it into three-dimensional
form and displays it in the element view window.
Mono/Color/Pitch
Switches display mode for the data currently displayed in the Work window area.
• Mono: The current image is displayed in monochrome. This parameter is effective only when
VIVID 9i is connected.
• Color: The color data acquired from the scan is displayed.
• Pitch: The color display is done in accordance with the distance data from Near to Far.
Current Angle
The current step angle is displayed. Normally, the angle is updated when a store operation is car-
ried out, so additional operations are not necessary. When the step angle has been changed to the
desired angle manually, data scan can be performed at the new step angles.
M
emo
This item is not displayed if “Free” is selected for [Rotation Step].
Angle
Rotates the rotary stage to the desired angle using the slide bar.
This item is displayed when the rotary stage has been initialized successfully.
Chart Scan
Used to scan the Calibration Chart data.
M
emo
This item is displayed if “Free” is selected for [Rotation Step].
Stage Apply
Initializes the rotary stage.
Prev/Next
Switches from one stored data to another.
[Prev] button: Displays the previous data.
[Next] button: Displays the next data.
Delete
Deletes the stored data currently displayed in the Work or Store window area. The corresponding
elements in the element view window are also deleted at the same time.
View
Displays/hides the data currently displayed in the Store window area into the element view window.
OK
Keeps the element data created during command execution and exits the File-Import-Digitizer-
One Scan command.
Note
Ifthe[SaveRawData]checkboxischecked,thedatasavedialogboxisdisplayed.
Cancel
Exits the File-Import-Digitizer-One Scan command.
The element data created during command execution will be deleted.
Option
Displays the [File-Import-Digitizer-Step Scan-Option] dialogbox.
Calibration
Executes the Calibration command and calibrates the VIVID 9i.
Note
HavetheFieldCalibrationSystemready.
Ref.
For details on user calibration, refer to VIVID 9i Instruction Manual.
 previous next