Konica Minolta VIVID 9i Universal Remote User Manual


 
25
Chapter
2
File
Menu
9i
910
900
700
300
File – Open
2
Select the file you want to load.
If you select an element le with an attached
image and you have also checked the Preview
box, the display area will show a preview im-
age.
Parameters for [File-Open] Dialog Box
Look in
Select the folder containing the le to open.
File name
File name selected on the list is displayed.
File of type
Data format of the selected le is displayed.
Preview
If you check the Preview box, the [File - Open] dialog box will display preview images of those
element les that have attached images.
M
emo
A clock icon will be displayed during loading.
To display les of a certain format only, select the
desired format from the [File of type] pull-down
menu.
M
emo
In the case of element les, it is possible to select two
or more les by clicking them while holding down the
[Shift] or [Ctrl] key. If two or more les are selected, the
preview image can be switched from one le to another
using the [BACKWARD] and [FORWARD] buttons.
Note
• Itisnotpossibletoselectlesofdifferentformats.
• Inthecaseofsceneles,onlyonelecanbeopened.
• Itisnotpossibletoopensceneleswhichhavebeen
savedusingtheUtilitySoftware VI-S1.
3
Click the [Open] button.
The data of the selected le(s) will be loaded
and displayed in the element view window.
When an element file is loaded:
The loaded data will be ready to be displayed in
all windows. It will be displayed in the active
window and the windows for which all the ele-
ments are set to be displayed.
When the data is loaded for the rst time after the
software is started, it will be fully framed in all
the windows including those that are hidden.
The names of the loaded elements will also ap-
pear in the element list, indicating that the ele-
ments have been selected (highlighted).
When a scene file is loaded:
The element list will show the names of the ele-
ments contained in the scene, and the view infor-
mation of each element will be loaded.
The state in effect when a scene le was saved
can be restored. However, it cannot always be
restored completely, for example, if elements in
the le have been set not to be displayed.
If an element has already been loaded, the Warn-
ing dialog box shown on the right will appear.
q Click the [OK] button.
All the elements that have already been loaded
will be deleted, and the data of the scene le
will be displayed.