Filter
Top Products
34
MOTION ENABLE
SENSITIVITY
REGION
MOTION SETTING
MAIN PAGE
: ON
: 3
: SET
( 30 , 40 ) - ( 99 , 99 )
SET MOTION REGION
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO CLOCK/ TIMER PAGE
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO CLOCK/ TIMER PAGE
NOTE: If the device is already under recording
mode before an alarm occur, the
pre-alarm recording will not take effect.
MOTION SETTING:
The motion detection function is convenient for
people without an alarm trigger input, but it can
also used be with an alarm trigger input. If this
function is enabled, object’s movement will
trigger the alarm recording just like the outside
trigger signal. Before using the motion
detection function, please turn the ENABLE
option to ON, and set the SENSITIVITY (1 ~ 5)
to a suitable value.
NOTE: The MOTION ENABLE option is not allowed
set to ON when MULTIPLEXER option is set to ON
in the RECORD page, it is because the motion
detection function is for single camera only.
MOTION ENABLE:
This option enables / disables the motion
detection.
ON: Enables the motion detection.
OFF: Disables the motion detection.
SENSITIVITY:
This option allows users to set the motion
sensitivity. 1 is the most sensitive setting. 5 is
the least sensitive setting.
REGION:
This option allows users to set the motion
region.
4.3 CLOCK / TIMER Setting
The DVR provides a weekly table consisting of
two periods of time each day for scheduled
recording. This option allows you to set the
time each day when the DVR will start and stop
recording.
CLOCK:
This entry allows users to set the system
time.
CLOCK/TIMER
CLOCK :SET
DAYLIGHT SAVING :OFF
REC ENABLE :OFF
TIMER :SET
TITLE :SET
MAIN PAGE