Filter
Top Products
85
7.8 ScanIP
Follow the instructions below to use the
ScanIP software to search the DVR devices
in a local network.
1. Click the
button to discover the
connection of the all-type device in the LAN.
The Device List will display the connection
of the all-type device.
2. Select the desired device of the DVR from
the Device List.
3. Click the desired device to show the window
while the DVR information acts to display
the desired changes instantly.
4. Do you want to execute an auto search for
free IP?
If and when you want to auto search the free
IP, select “Yes” or “No”. If clicked “Yes” the
software will provide the “Free IP Address”
boxes on the right side of the window. If you
click “No”, these address boxes will not
show.
5. Manual insertion of “Free IP Address”.
If you have clicked “No”, please manually
type in insertions as required against the
“Free IP Address”, “Gateway Address”, and
“NET Mask”. Follow each insertion you
make by typing in the “Login Name” and
“Password”, and click “UPDATE” to send
your alterations to the DVR.