Filter
Top Products
49
【Available Devices】：Here the whole
DVR list is shown. You can connect with
your selection. Double click any of them to
open the screen below. Please enter the
correct "Username" and "Password" to
log into this DVR. The default
"Username" and "Password" are
"admin" and "9999" respectively.
【Function Key】：Click each of these
buttons to execute its functions.
【Multiscreen Buttons】：You can
interchange between three buttons here :
the "Video Panel", "Web Page" and the
"Viewer Settings" buttons.
5.2.3 Operation
5.2.3.1 Remote Control
※ Step 1: After entering the "Viewer Software",
please click the button to select “1 Channels
DVR (Enhanced) ” and then click the
"Available Devices" button. The software will
automatically search the whole local LAN
1-channel DVR device to see a list.
NOTE: If you want to create a new DVR, please
press the
button to add it.
※ Step 2: Double click your selected device to
see a window as on the right. Enter the
"Username" and "Password" -- the default name
and password are "admin" and "9999".
※ Step 3: The default multi-screen is the
1-channel mode you see now.
※ Step 4 : The Viewer Software helps you
see any display mode you want.
1. Adjust the screen size: Move the mouse
to the vertical bar on the right side of the
"Work Devices" / "Available Devices"
box on the left margin of the screen. This
bar runs from the top to the bottom of the
screen, and when you move the mouse to
this bar, it shows like this: . You can
move this bar to the left to narrow the
"Working Devices" / "Available
Devices" box and to the right to widen it.
2. Text Insertion Mode: enable / disable.
Note: If the connected DVR has incoming
text data, that data will be shown in the
corresponding area for each channel at the
same time. Please remember to turn on the
RECORD/ TEXT INSERTION setting in the
DVR setup menu.
3. Text Insertion Setting: To set the
phrase/exception for the DVR, please click
this button option in the lower corner. The
following is the phrase setting page.