Filter
Top Products
35
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
REC SCHEDULE
OK
START END
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
START END
CANCEL
TO MOVE
TO CHANGE
S
M
T
W
T
F
S
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO COMM PAGE
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO COMM PAGE
NOTE: Clock data is retained for about 3 months
after the 15-hour power supply is used up (in the
operate On mode).
DAYLIGHT SAVING:
This entry allows users to set the daylight
saving time.
OFF: Disables the daylight saving time.
USA: Daylight saving time begins at 2:00 a.m.
on the first Sunday of April. Time reverts to
standard time at 2:00 a.m. on the last Sunday
of October.
EUROPE ( Except UK ): Daylight saving time
begins at 2:00 a.m. on the last Sunday of
March. Time reverts to standard time at 2:00
a.m. on the last Sunday of October.
UK: Daylight saving time begins at 1:00 a.m.
on the last Sunday of March. Time reverts to
standard time at 1:00 a.m. on the last Sunday
of October.
SET: to set the start and ending for the
daylight saving time.
REC ENABLE:
This option enables/disables the programmed
scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time
each day when the DVR will start and stop
recording. There are
2 time periods each
day available for scheduling. The time is
displayed in a 24-hour clock format. If there
is a time overlapping showing between two
continual time period settings, the device
will automatically combine the two
time-period settings into one.
4.4 COMMUNICATION Setting
This option allows you to configure the
statuses of the RS-232 / RS485
communication ports when connected to
external devices, and the Ethernet
communications settings. Please refer to 6.1
RS-232/RS485 Protocols and 5. Network
Functions for more details.
COMM SETTING
COMM ID :01
RS232 :ON
RS485 :ON
BAUD :2400
NET ENABLE :OFF
NET DHCP :OFF
NET IP :SET
NET ACCOUNT :SET
FTP SETTING
MAIN PAGE