Filter
Top Products
36
COMM ID:
Communication ID for the RS232 and RS485
communication ports. After the DVR
receives a
RS232 or RS485 command, it checks if the
<Dest ID> within the code is the same as the
COMM ID, in which case the particular
command can be accepted.
RS-232:
The RS-232 communication port can be
either in an importing or exporting mode
according to your applications.
ON: Enables the RS-232 communication port.
When you wish the unit to be controlled
by an external device, please select this
entry for use.
OFF: Disables the RS-232 communication
port.
RS-485:
The RS-485 communication port can be
either in an importing or exporting mode
according to your applications.
ON: Enables the RS-485 communication port.
When you wish the unit to be controlled
by an external device, please select this
entry for use.
OFF: Disables the RS-485 communication
port.
BAUD:
You have the option of using a Baud rate ( at
8 different levels : 2400, 4800, 9600, 19200,
28800, 38400, 57600 or 115200).
NET ENABLE:
This option enables or disables the Ethernet
communication port.
OFF: Disables it.
ON: Enables it.
NET DHCP:
This option enables or disables the Ethernet
communication port.
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the DVR
can get an IP automatically by setting this option
to ON.
NET IP:
This option is used to configure the Ethernet
communication settings. This is required for
the purpose of making a network connection.
Please consult with a qualified MIS
professional to configure it.
IP: XXX
.XXX.XXX.XXX
MASK: XXX
.XXX.XXX.XXX
GATEWAY: XXX
.XXX.XXX.XXX
HTTP PORT: XXXX
NET ACCOUNT:
FTP SETTING:
This entry allows users to set the FTP File
Transfer Protocol.
NET ACCOUNT
USERNAME
PASSWORD
ADMIN [admin ] [9999]
VIEW [view ] [0000]
SET NET ACCOUNT
COMM SETTING
COMM ID :01
RS232 :ON
RS485 :ON
BAUD :2400
NET ENABLE :OFF
NET DHCP :OFF
NET IP :SET
NET ACCOUNT :SET
FTP SETTING
MAIN PAGE