Filter
Top Products
67
3.2.3.1 Full Text Display Mode.
All the incoming TEXT data are shown in the middle of the screen; the previous
data is scrolled up when the latest one arrives.
If the TEXT INSERTION option has been set as VSI-ADD, and incoming texts
come from different channels.
A percentage bar in the right-lower corner reveals the text data usage. For
example, if the total number of text data is 65536 and the number of the current
used text data is 32768, the bar will be shown about 50% full. For the precise
number please refer to SETUP/ SYSTEM/VERSION in the local device OSD.
3.2.4 RECORDING
When the text data continuously inputs from the Text device, press the REC
button to activate recording; while the DVR is in the RECORD mode, there is a
small red ball periodically flashing in the right-upper corner of the screen. Please
press the DISPLAY button to switch to a desired mode to observe the incoming
TEXT data.
.
To stop recording, please press the REC button and hold for more than3 seconds
before releasing.
3.2.5 PLAYBACK.
Press the SEARCH button to enter the Search Menu, highlight a desired item in
the list, and then press the ENTER button to start playback. During playback, the
DISPLAY can also be used to switch to the display modes, to see the Text data
that was received when the corresponding video was recorded. The Text data is
shown even in the trick play mode, like fast forward and slow motion.
If the TEXT INSERTION option has been set as VSI-ADD and incoming texts
come from different channels.
3 ALE .58
4 PLUM RED .68
1 10-01-97 10:53P
2 NECTARINES 1.78
3 10-01-97 11:20P
4 MILK 5.72
1 SM TOMATOS .48
2 CLASSIC COKE .58
3 BREAD .98
4 BANANAS 1.52
01-05-2006 14:26:25