Filter
Top Products
6
3
PAUSE button:
In a playback display, press this to freeze the display. During the freeze, press to display one
frame/field of a picture at a time in the forward direction. (A green light is on the PAUSE mode.)
4
PLAY button:
Press to play back a recorded video from the hard disk. (A green light shows in the PLAY mode.)
5
STOP button:
Press to stop playing back a recorded video. (A green light goes on in the STOP mode.)
6
REC button:
Push to start recording video into a hard disk while in the live display mode. (A red light turns on
in the REC mode.)
7
POWER button:
Press this button for at least 3 seconds to power off. Press again to activate the device.
8
DISPLAY button:
Press to show the system operation status on the screen.
9
Setup button:
Press this to enter the setup menu. Press again to exit the setup mode.
10
Search button:
Press to enter the search mode to access the recorded video.
11 14
Left / Right buttons:
Press the two buttons to highlight desired items in the menu setup mode. For the Key Lock
operation, press these two buttons simultaneously once; to disable Key Lock, press these two
buttons again simultaneously.
12 13
Up / Down buttons:
Press these two buttons to select the desired contents for programming in the setup menu mode.
15
Enter Button:
Press to enter a selected item and save the setting in the menu setup mode.
16
Monitor button:
Press to switch between a multiplexer-decoded video and the encoded video to be displayed
when connected with a multiplexer. When the button light is on it indicates the unit is displaying
the decoded video.( The images are not multiplexing . ) In this mode, the unit doesn’t display the
OSD message of the unit on the screen. However, this doesn’t affect the unit’s OSD message,
which is recorded into hard-disk drives. When the button light is off it indicates the unit is
displaying encoded video. (The images switch swiftly).
17
T-rec Indicator:
This indicator of the timer recording mode lights up to signal the scheduled record setting is on.
18
A-rec Indicator:
This indicator of the alarm-recording mode lights up to indicate the alarm record setting is on.
19
DISK Indicator:
The indicator shows the operation status of the unit’s hard-disk drives. The green light indicates
the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up.