Mitsubishi Electronics DX-TL5000E DVR User Manual


 
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
12
22 24 29 30
31
32
25 26
27
28
3323
22. POWER button
Turns on the power when pressing while the MAIN
switch on the rear panel is set to ON. When the
button is pressed again, the unit switches to stand-
by mode. The POWER button operation is not
accepted while the POWER indicator is flashing.
23. VIDEO OUT connector
Output connector for video signal (RCA pin).
24. SERIAL BUS port
Input and output port for the device equipped with
SERIAL BUS port.
25. HELP button
Displays the help menu which shows the caution
on use, operating method, and explanation on
functions.
Uses when the warning message is displayed.
This button can be used even while the menu screen
is displayed.
26. SET UP button
Displays the <User Menu>.
27. SEARCH button
Displays the <User Menu> with search menu
opened.
28. TIMER button
Sets the unit to timer recording/stand-by mode and
lights up the TIMER indicator. When pressing this
button for more than 2 seconds, timer recording/
stand-by mode is cancelled and the TIMER indicator
turns off.
29. LOCK button
Activates simple lock or password lock when pressing
while the MAIN switch (main power) on the rear panel
is turned on and lights up the LOCK indicator. Moreo-
ver, the PASSWORD can be set on the <Password
Setting> (Setup Menu System Password Setting).
30. TRIPLEX PB button
Inserts the playback picture of the desired camera
number while displaying the picture supplied from
the camera.
31. BOOK MARK button
When pressing this button during frame still playback
of the single screen display, the selection screen
appears and you can memorize the book mark or
copy the picture being displayed.
32. DIGITAL ZOOM button
Magnifies the picture when pressing during single
screen display or during playback. Pressing a cam-
era number button (11, 14, 15, or 16) moves the
magnification centre point.
33. Operation buttons
STOP button
Stops playback.
PAUSE/JUMP TO END button
Switches the playback to still frame playback when
pressing this button during playback. Resumes
playback when pressing this button again. The
button lights up during still frame playback.
When pressing this button during shuttle playback,
the set playback speed is maintained even when
letting go of the SHUTTLE ring. (Shuttle hold)
When pressing this button during the unit is in stop
mode of playback, the frame still picture of the end
point of the latest recording appears. (Jump to end)
REV. PLAY (REVERSE PLAY) button
Starts reverse playback. The button lights up during
reverse playback.
PLAY button
Starts playback. The button lights up during
playback.
SPEED (+ and ) button
Switches the playback interval when pressing these
buttons during normal or reverse playback.
Major operations and their functions (continued)
Front view (inside of the door)