Filter
Top Products
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
94
3-1. (If you make an error in entering the user ID or
password • • • )
• The “[Caution]” screen appears.
3-2. Select “Login” and either left-click or press ENTER.
• The “[Login]” screen appears.
3-3. Follow the steps in step 2-1 and enter the correct “User
ID” and “Password.”
4-1. (If you do not log in • • • )
Select “If you won’t log in, please go to Logout.” and
left-click.
4-2. The message “Session ID removed from recorder &
browser. Please close the browser.” will display. Close
the Web Browser.
5-1. (To change password • • • )
The password can be changed in the “[Login]” screen
only by the user who has the authorization to change
a password. Follow the instructions in the menu and
enter the current “User ID” and “Password.”
5-2. Enter the new password in “New password” and again
in “New password (Confirmation).”
• The number of characters that can be used in
registering a password is 16. Both alphabet letters
and numbers can be used with a distinction made
between upper and lower case. You cannot use
spaces.
5-3. To change into a new password, select “change” and
left-click or press ENTER. To cancel the change, select
“clear,” and left-click or press ENTER.
Main Menu
This is the screen for selecting, from “Main menu,” “Live
Monitoring” with which live pictures will be retrieved and
displayed, “Playback” with which pictures that have already
been recorded will be retrieved and displayed,
“Configuration Menu” with which some of the settings of
the recorder will be made, “Logout” for ending a job, or
“Change Login User” for making a change in the logged-
in user.
• Depending on what the user’s authorization is, there
are certain menus that cannot be selected.
• The transfer rate at communication changes
depending on the communication environment or
unit’s status. For the stable communication, use this
unit with the proper picture transfer speed suitable
to the conditions.
• The user’s session ID (connection data) will be lost
in 5 minutes from the final operation that includes
picture retrievals. If no operations are made within
that 5 minutes, no other operations can be made after
that so close the browser and then log in again.
• If the unit’s MAIN switch is “OFF,” live and recorded
pictures cannot be retrieved.
1. Select the desired menu from “Main Menu” and left-
click.
Communications by Web Browser (continued)