Filter
Top Products
91
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Basic operations
Basic search
This function is used to search the start point of the desired
picture. This unit equipped with 5 search functions (Search
by Time and Date, Search by Alarm List, Find data storage
location, Search by Book Mark, and Search by Motion). In
this section, the common search methods, search by time
and date and search by alarm list, are described.
Search by Time and Date
This item is used to search the picture by specifying date,
hour, minute, second, and camera number to be searched.
The search result is displayed in still frame playback. When
searching for 1 camera number, the search result is
displayed in the single screen display. When searching for
2 or more camera numbers, it is displayed in SPLIT16
screen.
Search by Time and Date
2
User Menu
Search
1
step1. When you set the time and date to be searched
manually, select “Manual” and then set the date,
hour, minute, second, and camera number.
step2. Select “Search.”
step3. When you search the start and end points of
recording, select “Start” and “End” respectively.
step4. To playback the searched picture, press either the
PLAY button or the PAUSE button.
step5. To stop playback or still frame playback, press the
STOP button.
• To change the device to be searched, set the desired
device in the <Select Source Device> (User
Menu Search Select Source Device). ( See page
40 for the details.)
• To display the single screen display of the desired
camera number when the search result is displayed
in the SPLIT16 screen, press the desired camera
number button.
• When there is no recording of the set time, the picture
of the closest time and date for the set camera number
is displayed in still frame.
• When the multiple recorded data of the same date
and time are existed, execute search by time and date
more than once until the desired picture is searched.
• Depending on the recording condition, search by time
and date function may not operate correctly.
• When changing the display from single to split or from
split to single during still frame playback, the recorded
picture may not be existed at a neighbourhood of that
point or picture may not be displayed depending on
the selected camera number or timing of displaying
the still frame playback picture.