Filter
Top Products
34
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Setup Menu (200 000 000)
2
Timer
3
Motion Det
5 Emergency Recording Setup 215 000 000
D Execute 215 D00 000
6 Audio Recording Setup 216 000 000
E Exit
1 Program Selection and Program Overview
221 000 000
2 Overview > 221 200 000
3 Overview > 221 300 000
2 Configure Timer Program 1 222 000 000
3 Configure Timer Program 2 223 000 000
4 Define Holidays 224 000 000
E Exit
1 Time/Date Setting 241 000 000
A Auto + D Set > 241 D00 000
2 Menu Language Selection 242 000 000
3 Rear Terminal Setting 243 000 000
1 Settings > 243 100 000
2 Settings > 243 200 000
4 Password Setting 244 000 000
1 Setting > 244 100 000
2 Setting > 244 200 000
3 Setting > 244 300 000
4 Setting > 244 400 000
1 Set Motion Detection Pattern A 231 000 000
A +
12
Set > ––––––––––
13
Go test > ––––––––––
2 Set Motion Detection Pattern B 232 000 000
A +
12
Set > ––––––––––
13
Go test > ––––––––––
E Exit
Specifies recording time for long pre-alarm recording, and recording
time, maximum recording rate, and camera for emergency recording.
Displays the preview of the emergency recording settings.
Specifies the audio record setting.
Exits the Recording menu.
Specifies the program number of timer setting.
Displays the overview of Program 1.
Displays the overview of Program 2.
Specifies the settings of Program 1.
Specifies the settings of Program 2.
Specifies the holidays.
Exits the Timer menu.
Adjusts time date setting and selects daylight saving setting.
Specifies the time period for daylight saving settings.
Selects menu language to be displayed.
Specifies the settings for MODE OUT terminal, CALL OUT
terminal, key sound, and buzzer.
Specifies mode out settings and remain settings.
Specifies call out settings and remain setting.
Registers the password.
Registers the password of level 1.
Registers the password of level 2.
Registers the password of level 3.
Registers the password of level 4.
Specifies the detecting condition of Motion A.
Specifies the active area of the motion detection (Motion A).
Tests the operation of the motion detection (Motion A).
Specifies the detecting condition of Motion B.
Specifies the active area of the motion detection (Motion B).
Tests the operation of the motion detection (Motion B).
Exits the Motion Det menu.
D
Next
4
System
Proceeds to System Menu.
Menu chart (continued)
Setup Menu (continued)