Filter
Top Products
130
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Specifications
Specifications
Rated Power Supply: 100 to 240 V AC ±10 %, 50/60 Hz
Rated Input: 1.0 - 0.45 A (100-240 V)
Colour System: PAL-type colour system.
Operating Temperature: 41 °F-104 °F (5 °C to 40 °C)
Relative Humidity: Max. 80 (%)
Altitude: Max. 2000 (m)
Dimensions: 425 (Width) x 390 (Depth) x 185 (Height) (mm)
Weight: 13.4 kg
Recording System Digital recording system
Sampling 13.5 MHz
Data Compression JPEG2000
Compression Unit Frame, Field
Recording Resolution 720 x 576, 720 X 288
Recording Device 250 GB HDD
Video Input: 16 Input BNC-Connectors: 1.0 V(p-p), 75 ohms.
Monitor Output: S-Connector: Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.3 V(p-p), 75 ohms.
2 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
RCA-jack: 1.0 V(p-p), 75 ohms.
Throughout Output: 16 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
Cascade Video Input: BNC-Connector: 1.0 V(p-p), 75 ohms.
Cascade Video Output: BNC-Connector: 1.0 V(p-p), 75 ohms.
*optional audio interface board
Audio Input: 4 RCA-Jacks: 308 mV(rms), 50 k ohms.
Audio Output: RCA-Jack: 308 mV(rms), 1 k ohms.
Cascade Audio Input: RCA-Jack: 308 mV(rms), 50 k ohms.
Cascade Audio Output: RCA-Jack: 308 mV(rms), 1 k ohms.
Clock: ±20 seconds/month (when power is supplied, 25 °C)
Timer Program: 8 programs-Daily start and stop time for one week x 2 set
Memory Backup: Lasts for more than 1 month (when fully charged)
CONNECTORS
External storage terminal Serial bus (1-6) Approx. 480 Mbps Bus power Max. 10 W in total
(For connecting the recommended optional items only)
Control terminals
Clock adjust Input Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Clock adjust Output Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
(Clock adjust Output is throughout of Clock adjust Input)
Recording start Input Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Recording stop Input Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Emergency Input Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Mode out +/– (1-4) Active: Short Max. Drive current 500 mA DC.
(Relay output) Non active: Open. Max. Voltage 24 V DC.
Call out +/– Active: Short Max. Drive current 7 mA DC.
(Photo coupler output)
Non active: Open. Max. Voltage 24 V DC.
Ground terminal
DC 12 V Output Max. 350 mA DC (when Main switch and power button is turned on)
Alarm Input (1-16) Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Alarm Output (1-16) Active: “Low” Level Max. Drive current 7 mA DC.
Non active: Open. Max. Voltage 24 V DC.
PTZ terminal RS-232C terminal
RS-422 terminal
Serial port RS-232C D-SUB 9 pin
RS-485 port RS-485 Input/Output RJ-11
Communication
LAN (A, B) Connector form: RJ-45 Physical interface: 10BASE-T/100BASE-TX
(A for external storage, B for communication)
Card slot for optional board PCI-compliant slot type (low profile) (For connecting the recommended optional items only)
DVD-R/RW, CD-R/RW recording format Original format
Accessories: AC power cord (for U.K/for the Continent) 2
Screws 8
CD 1
Mouse 1
Cable clamping band 2
Ferrite core 1
Installer’s manual (this manual) 1
User’s manual 1
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
This unit complies with the European EMC test standard EN50130-4.