Filter
Top Products
30
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Menu chart
User Menu (100 000 000)
1
Search
2
Copy
3
Information
D
Next Proceeds to Setup Menu.
1 Select Source Device 111 000 000
2 Search by Time and Date 112 000 000
3 Search by Alarm List 113 000 000
D Alarm List 113 D00 000
4 Find data storage location 114 000 000
D Search (Device Search List) 114 D00 000
5 Search by Book Mark 115 000 000
6
Search by Motion
116 000 000
B Next > (Motion Detection Settings) 116 B00 000
A + D Go ––––––––––
EExit
1 Copy Data to Copy A Drive 121 000 000
1 Start/End + 2 Set > 121 2SE 000
1 Start + 2 Set > 121 2S0 000
1 End + 2 Set > 121 2E0 000
2 Copy Data to Copy B Drive 122 000 000
1 Start + 2 Set > 122 2S0 000
1 Continue + 2 Set > 122 2C0 000
3 Set Copy A Drive 123 000 000
4 Set Copy B Drive 124 000 000
EExit
1 Main Storage Memory Information 131 000 000
2 Copy A Drive Information 132 000 000
3 Copy B Drive Information 133 000 000
EExit
Selects the device to be played back/searched.
Searches the desired picture by specifying the time and
date.
Searches the desired picture from the alarm list
registered at the start of alarm recording.
Displays the list of alarm recording.
Detects the device which is used for recording by
inputting the recorded period.
Displays the list of devices used to record for the
specified time period.
Searches the desired picture by specifying a bookmark
registered.
Searches camera picture with motions by using motion
detection function during playback.
Sets the condition for motion detection.
Sets the motion detection area manually.
Exits the Search menu.
Copies the necessary data to copy A device by specifying the
start and end points of the data to be copied. (for short period)
Specifies the start and end points to be copied.
Specifies only the start point of the copy.
Specifies only the end point of the copy.
Copies the necessary data to copy B device by specifying
only the start point of the data to be copied. (for long term)
Specifies the start point of the copy.
Copies the data from the end point of the previous copy.
Specifies the condition for copying the recorded picture to
copy A device.
Specifies the condition for copying the recorded picture to
copy B device.
Exits the Copy menu.
Shows the recorded range of each area in the main
device.
Shows the recorded range of each group in copy A
device.
Shows the recorded range of each group in copy B
device.
Exits the Information menu.
Menu chart
You can set the basic settings for this unit in the menu settings.
Some of the menu settings cannot be changed during playback, recording, or stand-by mode for pre-alarm recording.
User Menu