Filter
Top Products
24
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
How to set the menus
Setting the menus
The operational conditions of this unit can be set in the menu screens. You can select and set the operational conditions
by using the buttons on the front panel or the mouse connected to this unit. In the menu screen, the numbers 1 to 16
(camera number buttons) and alphabets A to E (SPLIT screen buttons) show the button names on the front panel.
• When OUTPUT B is selected, the cursor of the mouse is displayed, however, the menu screen is not displayed and
cannot be set. The menus can be set only when the OUTPUT A is selected.
How to set a menu with a mouse
• Setting a mouse
step1. Attach the supplied ferrite core to the cable of the
mouse as illustrated to the left.
• Setting a menu with a mouse
step1. Use the left and right buttons to set the menu.
• Click the left button to open the menu or select
a desired item, etc.
• Click the right button to select the active area
for motion detection. ( See “Motion Det” on
pages 53 and 54.)
• With this unit, the wheel on a mouse is not
available.
How to set a menu with buttons on the unit
step1. Use the SET UP button, camera number buttons,
and the SPLIT screen buttons (A to E) to set the
menu.
• Press the SET UP button to open the menu
screen.
• Press the camera number buttons (1 to 16) and
the SPLIT screen buttons (A to E) to open each
menu or select the desired item.
Mouse
Right buttonLeft button
Wheel
M-DET
DOT ON/OFF
M-DET
AREA SET UP