Filter
Top Products
41
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
Search by Motion
The recorded picture of which the motion is detected can
be searched by specifying the motion detection conditions
for playback. For this function, the camera number and start
time can be specified to search. The search result is
displayed in frame still playback of the single screen display.
Search by Motion
Motion Detection Settings
Motion Mask Setting
User Menu
Search
1
B
A+D
6
steps
1, 2, 4
step
3
step1. Set the camera number to be searched.
step2. Set the time for start searching.
• To search from the oldest recorded point, select
“Oldest.”
• When the search start point is set to the earlier
time than the recording start point, the search is
executed from the oldest recorded point.
step3. Set the motion detection conditions for playback.
• Set motion mask setting, sensitivity, and motion
threshold. See pages 53 and 54 for the details
of these settings.
• The motion detection settings for recording
(Motion A or B) can be copied. To copy the settings
for recording, display the desired setting in “Same
as Recording Setting” and then select “same.”
step4. Select “Search.”