Filter
Top Products
19
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
Attaching or removing the HDD
Up to 3 HDDs can be mounted on this unit. The attaching,
removing and replacing method of the HDDs are as follows.
• Turn off the MAIN switch on the rear panel before
attaching or removing the HDD.
• When attaching multiple HDDs, attach in the order of
HDD A, B, and C.
When removing a HDD
step1. Push the left end of each screw covers on both sides
of the cover to open.
• Do not leave the screw cover open for general use.
step2. Remove the screws.
step3. Remove the front covers.
• Remove the cover on the right side first.
• Then, push the left side cover to the right to
remove.
step4. Remove the metal part.
• Remove 4 screws on the metal part.
step5. Pull out the HDD tray halfway.
HDD A
HDD B
HDD C
step6. Disconnect the cords.
step7. Remove the HDD tray.
• Pull out the HDD tray completely.
step8. Remove the HDD.
• Remove 4 screws which are used to fix the HDD
and its frame.