Mitsubishi Electronics WD-57833 Flat Panel Television User Manual


 
17
3
TV Connections
-
"6%*0
3
: 1C
1S
COMPONENT 1
Y Pb Pr (480i/480p/720p/1080i)
COMPONENT 2
RECORD
OUTPUT
OUTPUT
DIGITAL
IR EMITTER
NetCommand
RS-232C
ANT 1 /
MAIN
ANT 2 /
AUX
AUDIO
INPUT 1
INPUT 2
HDMI
VIDEO: 480i / 480p / 720p /
1080i / 1080p
W-SVGA, XGA, W-XGA,
AUDIO: LINEAR PCM
PC: VGA, W-VGA, SVGA,
1
(LEFT) ,, 2 (MIDDLE) 3 (RIGHT)
DVI / PC
VIDEO
AUDIO-
AUDIO-
RIGHT
L (MONO)
INPUT
AVR
AUDIO
AUDIO
OUTPUT
S-VIDEO VIDEO - AUDIO - R
L (MONO)
- AUDIO - R
Y Pb Pr
EMITTER
3D GLASSES
IEEE 1394
LEFT
SXGA / 720p / 1080p
COMPONENT 1





$"#-&*/PS
4"5&--*5&*/
*ODPNJOHGSPN
$BCMF4FSWJDFPS
4BUFMMJUF%JTI
57
$BCMF#PY
PS4BUFMMJUF
3FDFJWFS
Figure 1. Connecting an external HDTV receiver with
component video connections
Auto Input Sensing
The TV’s Auto Input Sensing feature automatically rec-
ognizes most connections and prompts you to identify 
the type of device connected.  See chapter 2, “TV 
Setup,” for more on Auto Input Sensing.
Connection Types
Review the connection types available on your input 
devices and use connections that will give the best 
video quality.  For example, choose HDMI over compo-
nent video, and choose component video over S-video 
or composite video.
Picture Quality
For best picture quality, route signals directly from 
the input device to the TV; avoid routing video signals 
through an A/V receiver, for example.
If your cable box or satellite receiver has an HDMI 
output, use the connections for HDMI devices 
described later in this chapter.
Required:  RCA component video cables,  left/right 
analog stereo audio cables.
1.  Connect the cable from the outside cable or satel-
lite service to 
CABLE IN
 or 
SATELLITE IN
 on the 
cable box or satellite receiver.  See your device’s 
owner’s guide for instructions and cable compat-
ibility.
2.  Connect RCA-type cables from the 
Y Pb Pr
 outputs 
on the HDTV cable box or satellite receiver to 
COMPONENT
 on the TV back panel, matching the 
colored green, blue, and red connections.
3.  Connect left (white) and right (red) audio cables 
from the HDTV cable box or satellite receiver to 
COMPONENT
AUDIO L (MONO)
 and 
R
 on the TV 
back panel.
Note:
To hear digital surround sound, connect the digital 
audio output from your cable box or satellite re-
ceiver directly to your digital A/V receiver.
Sound Quality
For best surround sound audio quality, route audio 
signals from the input device directly to your A/V 
receiver or sound system whenever possible.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at many electronics
stores.
Before you Begin
HDTV Cable Box or Satellite Receiver with Component Video