Filter
Top Products
5. TV Menu Settings 49
Inputs Menu Options
Name
Cable Box,
Camcorder,
DVD, DVD2,
DVR, Game, HD
Disc, Satellite,
VCR, PC
On/Off (
ANT 1
and
2
only)
Off (HDMI only)
• Assign or change names of inputs appearing in the Input Selection
menu.
• Turn Ant-1 and Ant-2 On or Off.
• Turn unused HDMI inputs Off.
• Press to move between inputs.
• Press to select a name.
• If you change the name of an input after performing NetCommand
“learning,” the IR codes you “learned” are erased.
Note:
When you disconnect an HDMI device, the icon remains in the
Input Selection menu until you remove it. To remove an unwanted HDMI
icon, select Off for the HDMI input.
Order
Put frequently used icons at the start of the
Input Selection menu.
1. Press to highlight the icon to move.
2. Press
ENTER
to confirm the selection.
3. Press to drag the icon to the desired position.
4. Press
ENTER
to set the new position.
Learn
• Perform initial set-up of NetCommand control of a device.
• Add or remove individual keys from NetCommand control of a device.
See detailed instructions in chapter 6, “NetCommand.”
AVR
Set up NetCommand control of an A/V receiver. This set-up allows you to:
• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
• Make the A/V receiver switch automatically to the correct audio input when you select a
device in the TV’s
Input Selection menu.
See detailed instructions in chapter 6, “NetCommand.”
Guide
Guide On/Off
See instructions on the following page for the TV Guide
On Screen system.
Devices Ant-1, Ant-2
Zip Code [5-digit ZIP code]
Inputs Menu
Change input names using the Inputs > Name menu.
Note:
When you change an input name in the Name menu
and then exit the Name menu:
The name is changed
The icon in the Input Selection menu is changed
Audio and video settings are changed to the
defaults for the new device type.
All NetCommand “learning” for the input is also
erased.