Mitsubishi Electronics WD-57833 Flat Panel Television User Manual


 
5. TV Menu Settings 47
Setup Menu, continued
Timer
Use the Timer to set a time for the TV to turn on auto-
matically.  Use this menu to set a day, time, input, and 
channel for the Timer.  If the TV is already on at the 
requested time, the TV will automatically tune to the 
designated channel.
•  The TV clock must be set before you can use the 
Timer feature.
•  When the Timer turns on the TV, press any key on 
the remote control to keep it on.  Otherwise, the TV 
will turn off after five minutes.
•  The 
TIMER
 indicator slowly flashes green when the TV 
is off to indicate the TV Timer has been set.
Setup menu, Timer options
Setup Menu Options
Timer
Timer On, Off
Day Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc.
Select the day or days of the week for the Timer to turn on the TV.
Time To set the time for the TV to come on:
1.  With the hour highlighted, press    repeatedly to change the hour and the AM/
PM indicator.  Press and hold to change the hour display quickly.
2.  Press 
ENTER
 to highlight the minutes.
3.  Press   t
o change the minutes.  Press and hold to change the minutes display quickly.
Input Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on.  Choose from the defined 
and enabled inputs that appear in the Input Selection menu.
Channel
If the input is an antenna (
ANT 1
, 
ANT 2
), press   repeatedly or press and hold to 
scroll quickly through the available channel numbers.