Mitsubishi Electronics WD-57833 Flat Panel Television User Manual


 
44 5. TV Menu Settings
Setup Menu Options
Language
English
Spanish
Display on-screen menus in either English or Spanish.
Note:  To listen to audio in other languages (when available), see the section 
on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog 
signal) or Language (digital signal).
  Scan
Ant-1 Air
Ant-1 Cable
Ant-2 Air
Ant-2 Cable
Scan memorizes broadcast channels to make them easier to find.  To start 
channel memorization:
1. 
Highlight one of the input selections based on your connection to
ANT 1
or 
ANT 2
:
•  Air when connected to an indoor or outdoor antenna.
•  Cable when connected to direct cable (no cable box)
2.  Press   to highlight START.
3. Press 
ENTER
 to start channel memorization for the selected input.
Setup Menu
Setup menu, Scan option
Use the 
Setup menu to:
•  Select English or Spanish for menus and on-screen 
text.
• 
Scan the channels available for the antenna or cable 
service connected to th
e 
ANT 1
 or 
ANT 2
 jacks.
•  Edit channel options, including channel locking.
•  Set the TV’s internal clock.
•  Set the TV Timer to turn on the TV automatically at 
a designated time.
•  Set the energy mode for power consumption when 
the TV is powered off.
•  Set the TV Lamp Mode.
Notes on Scan and channel memorization:
•  Channel memorization may take up to 15 minutes 
to complete.
•  To stop channel memorization before completion, 
press 
CANCEL
.
•  When watching TV, press 
CH
 to move through 
memorized channels.
•  If you restart memorization, previously memorized 
channels for the selected input will be erased.
•  To add a digital channel that does not appear in 
the Edit menu without repeating channel memori-
zation:
1.  Look up the physical channel number 
for the new digital channel.  The website 
www.antennaweb.org can help you find the 
physical channel number.
2.  Tune to any channel on the 
ANT 1
 or 
ANT 2
input your antenna is connected to.
3.  Use the number keys and 
CANCEL
 to enter the 
physical channel number followed by “-1” and 
ENTER
.  For example, for physical channel 36, 
press
3
  
6
  
CANCEL
  
1
  
ENTER
.
The TV will search for a digital channel on the 
channel 36 frequency.  When it finds the channel, 
it will:
a.  Add the channel to memory.
b.  Change the channel number to the virtual 
channel number sent by the broadcaster.
c.  Add to memory any associated sub-chan-
nels.
•  In the TV Guide On Screen system, the chan-
nels displayed and the order in which they are 
displayed are independent of the TV’s channel 
memorization performed with Scan.  Refer to the 
TV Guide On Screen Interactive Program Guide
User’s Manual for detailed instructions on editing 
channels in the TV Guide On Screen system.