Mitsubishi Electronics WD-57833 Flat Panel Television User Manual


 
6. NetCommand 59
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Guide Displaying the Disc Menu (DVD or high-defini-
tion disc format)
“Learn” the 
DISC MENU
, 
TOP MENU,
 or other key as 
named on the original remote in the Guide
learning position.
While watching the device, press 
GUIDE
 to display 
the disc menu.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1.  “Learn” the 
GUIDE
 key on the original remote in 
the Guide learning position.
2.  Learn the 
PAGE
 and 
PAGE
 keys of the 
original remote in the Page Up and Page Dn
learning positions.
1.  While watching the device, press 
GUIDE
 to 
display the guide.
2.  Press 
CH/PAGE
 /   to send the Page Up/Dn
commands for the guide.
Page Up
Page Dn
Using Page Up/Down
If the device’s original remote control has separate 
keys for Channel Up/Dn and Page Up/Dn, the 
TV remote control’s 
CH/PAGE
 /   key can work 
like the two separate keys. 
1.  “Learn” 
CHANNEL
/  in the Channel Up/Dn
positions.
2.  “Learn” 
PAGE
/  in the Page Up/Dn posi-
tions.
Inside the Guide
Press 
CH/PAGE
 /   to send the Page Up/Dn com-
mands.
Outside the Guide
Press 
CH/PAGE
 /   to send the Channel Up/Dn
signal.
Enter Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions.  One key is for menus and is often labelled 
SELECT
 or 
OK
.  A second key is for use with number keys for direct channel selection.  NetCommand uses 
the same 
ENTER
 key for both operations.
When 
ENTER
 has a menu or guide function or when 
the original remote control uses the same key for 
menus and channel selection:
Learn the 
ENTER
, 
SELECT,
 or 
OK
 key in the 
NetCommand Enter learning position.
1.  Press 
MENU
 or 
GUIDE
to display the device’s menu 
or guide.
2.  Press 
ENTER
 within the menu and NetCommand 
will send the Enter signal for menus.
Enter (digits)
When 
ENTER
 is for channel changes, i.e., the original 
remote control has a separate 
ENTER
 key for this 
function):
Learn the 
ENTER
 key for channel selection in the 
NetCommand Enter (digits) learning position.  
Use this learning position only if the original 
remote control has separate keys for Enter in 
menus and Enter for channel selection.
Press digit key(s) and then press 
ENTER
.  
NetCommand will send the Enter signal for 
channel selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the Cancel or Exit function in the 
NetCommand Cancel learning position
1.  Press 
MENU
 or 
GUIDE
 to display the menu or guide.
2.  Press 
CANCEL
 and NetCommand will send the 
Cancel or Exit signal.
(separator)
The symbol “—” can serve as the separator 
between a digital channel’s main and sub-
channel digits, e.g., digital channel 12-1 (main 
channel is 12, sub-channel is 1).
“Learn” the channel separator function in the 
NetCommand – (separator) learning position.
Press digit key(s) and press 
CANCEL
.  NetCommand 
will send the channel-separator signal.
Operating NetCommand-Controlled Devices, continued