Mitsubishi Electronics WD-57833 Flat Panel Television User Manual


 
58 6. NetCommand
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Power On Manual Power On/Off
Use for devices that have only one 
POWER
 key.
1.  Press 
INPUT
 to display the Input Selection
menu.
2.  Press      to highlight the icon for the 
device to be powered on or off.
3.  With the Input Selection menu still displayed, 
press 
POWER
 to send the power signal; you may 
need to press 
POWER
 twice.
Note:  If you press 
POWER
 without the Input
Selection displayed, the TV will turn off.
4.  Press 
ENTER
to switch the TV to the device.
Power On
Power Off
Automatic Power On/Off
This feature is only for devices that have separate 
POWER ON
 and 
POWER OFF
 keys on their original remote 
controls.  If your device does not have a separate 
POWER OFF
 key, do not use the Power Off learn-
ing position; use only the Manual Power ON/OFF 
method described above.
In the NetCommand Learn screen:
a.  “Learn” the Power On command in the Power
On learning position.
b.  “Learn” the Power Off command in the 
Power Off learning position.
•  To Power On the Device
1.  Press 
INPUT
 to display the Input Selection
menu.
2.  Press      to highlight the icon for the 
device to be powered on or off.
3.  Press 
ENTER
to switch the TV to the device 
and NetCommand will send the Power On
command to the device.
•  To Power Off the Device
When you turn the TV off, the TV sends all 
learned Power Off commands to all devices.
Menu Displaying the Menu for a Device 1.  While watching a device, press 
INPUT
 to display 
the Input Selection menu with the device icon 
highlighted.
2.  Press 
MENU
 to send the menu signal to the 
device.  The Input Selection menu will auto-
matically clear from the screen.
Special Operation Methods
Operating NetCommand-Controlled Devices
To Control an A/V Receiver
Switching Audio to and from the A/V Receiver
1.  Press 
AUDIO.
2.  Press   to show the Speakers option.
3.  Press   to select either AV Receiver or TV.
Controlling A/V Receiver Power
1.  Press 
AUDIO.
2.  Press   to show the Speakers option.
3.  Press   to select AV Receiver.
4.  Point the remote control at the TV (not the A/V 
receiver) and press 
POWER
 to power the A/V receiver 
on or off
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the 
TV’s remote operates the volume and mute functions.  
Also, when you switch to a device in the Input Selec-
tion menu, the A/V receiver automatically switches to 
the correct audio input for the device.
To Control Most Device Types
As an example of NetCommand control, if you are 
watching your cable box and you wish to tune to the 
next channel higher, press 
CH/PAGE
.  NetCommand 
then sends the “learned” channel-up control signal to 
the cable box.
1.  With an IR emitter properly positioned in front of the 
device, use the 
Inputs > Learn screen to perform 
NetCommand setup for the device.
2.  When you wish to use the device, press 
INPUT
 to 
display the Input Selection menu.
3.  Press      to highlight the icon for the device.
4.  Press 
ENTER
 to switch the TV to the device.
Note:  
if you have set up automatic input switching 
for the A/V receiver, the A/V receiver will automatically 
switch to the correct input for the device.
5.  To operate the device using the TV’s remote 
control, set the slide switch to the 
TV
 position.
6.  Point the remote control at the TV (not the device) 
and press the key for the desired function.