Filter
Top Products
4 - 12 4 - 12
MELSOFT
4 CONVERTING TEXT,CSV FORMAT DATA TO GX Developer FORMAT
DATA
4.2 Converting CSV Format Data to GX Developer Format Data
This section explains the operation of converting CSV format data to a List or Device
comments, which are the formats the GX Developer can use.
4.2.1 Converting CSV format data to a list
The following explains the operation of converting CSV format data to a List, which can
be used by the GX Developer.
POINT
• See Section 6.2.1, "When a List is import by the GX Developer " for details on file
formats.
• There may be some cases where Instruction, I/O (Device), etc. cannot be
converted, depending on the CPU type of the project opened in the GX Developer.
See " GX Developer Operating Manual" for details.
(1) Start GX Developer
Start GX Developer
Open project
Start GX Developer and open the project
containing the CSV format data you wish to
import.
(2) Start GX Converter
1)
Start GX Converter.
1) Start GX Converter by clicking on
[Project] —
[Import file] —
[Import from TEXT, CSV format file].
(Continued on the next page)