Filter
Top Products
4 - 19 4 - 19
MELSOFT
4 CONVERTING TEXT,CSV FORMAT DATA TO GX Developer FORMAT
DATA
(From the previous page)
(5) Set delimiter
1)
2)
3
)
Caution
• About data created using spreadsheet software
Commas are used as the delimiters in the data created
and edited using spreadsheet software.
Separate into columns by setting delimiters.
1) Select a delimiter for each data. (Multiple
delimiters can be selected.)
• Tab
Select it when using tabs as delimiters.
• Semicolon
Select it when using semicolons as delimiters.
• Comma (default)
Select it when using commas as delimiters.
• Space
Select it when using spaces as delimiters.
• Other
When using a character other than above as
the delimiter, check the checkbox and enter
the character.
2) Verify the separated data in the Data Preview
area.
3) When the setting is complete, proceed to the
next step by clicking the NEXT>
button.
(6) Set column data
Click !
1)
2)
Caution
• When setting data format
When data format are overlapped, the program cannot
proceed to the next step if the overlapping data format
is other than Device number.
When "Do not Import (Skip)" is selected, conversion
will not take place even if data is present in the column.
Set the column data format.
1) Set data types in the Data Preview area.
Select a column (the selected column becomes
highlighted in black) by clicking the Data
Preview area of each data column.
Next, select a column data format from
"Column Data Format" in the upper-right area.
To select multiple settings, repeat this
operation.
2) When the setting is complete, proceed to the
next step by clicking the NEXT>
button.
(Continued on the next page)