Filter
Top Products
4 - 20 4 - 20
MELSOFT
4 CONVERTING TEXT,CSV FORMAT DATA TO GX Developer FORMAT
DATA
(From the previous page)
(7) Set export destination data
1)
2)
3)
4)
Set which project data within the GX Developer
the converted data is to be export.
1) Select the data type for the data to be export.
2) Specify a data name for the data to be
converted.
Enter or select a data name.
The entered data name is export to the project
that is currently open in the GX Developer.
3) Enter a Title for the data to be export.
4) When the setting is complete, execute the
conversion processing by clicking the Finish
button.
Caution
• When entering a data name
If the PLC series for the project is a QnA Series, the data
name must be 8 characters or less. If the PLC series for
the project is A Series, FX Series, or Motion (SCPU), only
the predetermined names such as MAIN and SUB1 can
be used.
See "
GX Developer Operating Manual" for details.
• When an existing data name is entered or selected
An overwrite verification dialog box is displayed.
Click on the Yes
button to discard and overwrite the old
data.
Click on the No
button to end GX Converter.
(Continued on the next page)