Mitsubishi WD-52631 Projection Television User Manual


  Open as PDF
of 108
 
36 Chapter 3. TV Operation
Choosing a Program Source
NOTE: Ifyouronlyviewingsourcesareconnectedtothe
ANT 1
and
ANT 2
antennajacks,youcanswitch
inputswithouttheInputSelectionmenu.Press
INPUT
toswitchbetween
ANT 1
and
ANT 2
.To
verifywhichisthecurrentsourcewhilewatching
TV,press
INFO
toseetheon-screenstatusdisplay.
Selecting from Multiple Sources: The Input
Selection Menu
TheInputSelectionmenuallowsyoutoselectaninputto
watchontheTV.Thecurrentinputappearsasagold-
coloredicon.
1. Press
INPUT
ontheTV’sremotecontroltodisplaythe
InputSelectionmenu(Figure2).
2. Toselectadifferentinput,press ontheTV’s
remotecontroltomovethehighlightthroughiconsin
theinputsection.
3. Press
ENTER
toswitchtothedeviceandclosethemenu.
More About the Input Selection Menu
• Toassignmeaningfullabelstotheicons,suchas
“VCR”or“DVD,”seethe“InputName”sectionof
chapter4,“TVMenuSettings.”
• Torearrangetheicons,seethe“IconOrder”sectionof
chapter4,“TVMenuSettings.”
• TousewithIEEE1394devices,seeadditionalinforma-
tioninchapter7,“UsingIEEE1394Devices.”
Input Section
Figure 2. Input Selection menu
ChannelView™ Channel Listings
ChannelViewprovideslistings,assentbythebroadcast-
ers,formemorizedchannelson
ANT 1
or
ANT 2
.Digital
channelsareindicatedwitha“D”andanalogchannels
withan“A.”Digitalchannelsareshownwiththemajor
channelandsub-channels(orbitstreams).Theanalog
channelnameisdisplayedifyouenteredanameinthe
Channedlmenu.
Note: Iflimiteddataisshownornoprogramdataap-
pears,itisbecausethebroadcasterisnotsending
theinformation. This is not a defect of your TV.
Using ChannelView
Feature Instructions
Viewlistingswhileviewing
ANT 1
or
ANT 2.
Press
GUIDE.
Scanthroughmemorized
channelsonebyone.
Press
or .
Scanquicklythroughmemo-
rizedchannels.
Press
PAGE
/ .
Viewdetailedinformationfor
digitalchannels.
Press
or tohighlight
achannelandpress .
Returntoviewingbasiclist-
ingsinformation
Press
.
Figure 3. ChannelView screen, current programs. Use
to exchange displays for current and future programs.
Figure 4. ChannelView screen, future programs on the
selected channel (digital channels only)
IMPORTANT
To receive ChannelView updates: Set the
Energy Mode to Fast Power On and leave the
TV powered off for a while each day. If the TV
loses power, program listings will be lost until
the next update.
 previous next