Mitsubishi WD-52631 Projection Television User Manual


  Open as PDF
of 108
 
Chapter 7. Using IEEE 1394 Devices 83
Recording from the ChannelView™ Channel
Guide
ChannelViewprovidesprogramlistings,assentbythe
broadcasters,formemorizedchannelson
ANT 1
and
ANT 2
.Pressthe
GUIDE
keywhilewatching
ANT 1
or
ANT 2
toviewChannelViewlistingsandtosetupimme-
diateorfuturerecordingsasdescribedhere.
Immediate Recording from ChannelView
1. Press
INPUT
toopentheInputSelectionmenu.High-
lightan
ANT 1
or
ANT 2
programsourceandpress
ENTER
.
2. Press
GUIDE
toopentheChannelViewchannelguidefor
thecurrentinput.
3. Use tohighlightthechannelandprogramyou
wishtorecordfromthelistofchannels.
4. Press (
RECORD
).
Ared“R”temporarilydisplaysnexttotheprogram
listingtoindicatetheprogramwillberecorded.
5. Press
EXIT
toreturntoTVviewing.
Time-Delayed Recording from ChannelView
Set Up the Recording
1. EnsurethatTVEnergyModeissettoFast Power On
andtheTVclockissettothecorrecttimeandday.
See“SetupMenu”inchapter4,“TVMenuSettings.”
2. Performsteps1and2describedabove.
3 Press tohighlightthesourcechannelyouwishto
recordfrom.
4. Press toviewalistoffutureprogramsonthat
channel.
5. Press tohighlightafutureprogram.
6. Press (
RECORD
).
Ared“R”temporarilydisplaysnexttotheprogram
listingtoindicatetheprogramwillberecorded.
Youcanscheduleamaximumof32recordings.
7. Press
EXIT
toclosethemenu.
Confirm the Recording Setup
1. Press
(
RECORD
)toopentheRecordmenu.
2. Press
GUIDE
toopentheRecordList(figure2)andview
allscheduledrecordings.Press
CH
/ topage
quicklythroughthelist.
3. Verifythattheprogramyouwishtorecordappearsin
thelist.
4. Press
EXIT
toclosethemenu.
Recording to IEEE 1394 Recordable
Devices, continued
Cancelling Recordings
To Cancel a Recording in Progress
1. Press
INPUT
toopentheInputSelectionmenu.
2. Movethehighlighttothesourceinputicon.Thereis
noneedtopress
ENTER
.
TheInputSelectionmenudisplaysaniconforan
activerecordingconnectiontoarecordableIEEE1394
device.SeetheIEEE1394connectioniconinfigure3.
3. Press
CANCEL
.Theconnectioniconwilldisappearto
indicateterminationoftherecordingconnection.
4. Press
EXIT
toreturntoTVviewing.
Connection
Icon
Audio
Icons
Figure 3. The Input Selection menu displays specialized
icons for IEEE 1394 devices. The audio icons are
displayed only when an IEEE 1394 amplifier is connected.
To Cancel a Scheduled Recording
1. Press (
RECORD
)toopentheRecordmenu.
2. Press
GUIDE
toopentheRecordList(figure2)andview
allscheduledrecordings.Press
CH
/ topage
quicklythroughthelist.
3. Highlighttheprogramyouwishtoremovefromthe
RecordListandpress
CANCEL
.
4. Press
EXIT
toclosethemenu.
 previous next