Mitsubishi WD-52631 Projection Television User Manual


  Open as PDF
of 108
 
86 Chapter 7. Using IEEE 1394 Devices
Switching Between Analog and
Digital IEEE 1394 Outputs
Toenableswitchingbetweenanaloganddigitaloutputs,
youmusthavecheckmarkedtheAnalog Connection
boxwhentheNew1394Devicescreendisplayedwhen
youfirstconnectedthedevice.Seethesection“Before
YouBegin”inchapter2,“TVConnections.”
Figure 5. The ClearThought Auto Input sensing screen
for IEEE 1394 devices. Place a check in the Analog
Connection box if your device has both analog and digital
outputs.
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. HighlighttheiconfortheIEEE1394deviceandpress
ENTER
.
3. Press toswitchbetweeniconsrepresentingthe
analoganddigitaloutputsofthedevice.Seefigure
6.
Figure 6. The Input Selection menu shows icons for the
analog and digital outputs of the IEEE 1394 device.
4. Press
ENTER
toselectthedeviceoutput.
 previous next