Mitsubishi WD-52631 Projection Television User Manual


  Open as PDF
of 108
 
Appendices 97 Appendices 97
Appendix D: Troubleshooting, continued
TV Channels
Symptom Remarks
1. TheTVtakesseveralsecondstorespondto
channelchanges.
• Itisnormalfordigitalchannelstotakelongertotunein.
• PressENTERafterachannelnumbertoavoiddelays.
• Usea4-digitnumberforanover-the-airdigitalchannel.
• Usea6-digitnumberfordigitalcablechannelsifyourcable
serviceisabletorecognize6-digitchannelnumbers.
2. Youcannotaccessachannel.
• UsenumberkeysinsteadofCH
/ .
• Besurethechannelyouwanttoviewisinmemory.See
“ChannelMenu”inchapter4,“TVMenuSettings.”
• CheckthattheTVisturnedtothecorrectdeviceorantenna
forthatchannelbypressingtheINPUTbutton.
• MakesuretheParentalLockisoff.
• Ifyoucannottunetoavirtualdigitalchanneleventhoughthe
TVhasalreadymemorizeddigitalchannels,tunetotheactual
channelnumberusedbythebroadcaster.Thevirtualchannel
willthenbeautomaticallyaddedtomemory.
3.
Nameoptionsarenotavailableforsomechannels.
Onlymemorizedanalogchannelscanbenamed.
4. WhenChannelView™listisdisplayed,infor-
mationappearsincomplete
Availableinformationissentfromthebroadcasterorcablepro-
vider.Nootherdataisavailable.
General TV Operation
Symptom Remarks
1. AfanisrunningevenwhiletheTVispowered
off.
NormalTVoperation.WhentheTVisoff,internalcomponents
continuetodrawpowerandmustbecooledbythefan.
2. TheTVremotecontroldoesnotwork. • Checkthatthebatteriesarefreshandinstalledcorrectly.
• CheckthattheslideswitchissettoTV.
•
Benomorethan20feetfromtheTVwhenusingtheremotecontrol.
• ProgramtheremotecontroltooperatetheTVorotherdevice
(seechapter5).
• Resettheremotecontrol.Seechapter5.
3.
WhenItrytousetheremotecontrol,thePOWER
keyblinksfivetimes.
Replacethebatteries.
4.
TVdoesnotrespondtotheremotecontrolorto
frontpanelcontrolandTVwillnotpoweronoroff.
UsetheSystemResetbutton.
5.
WhenadeviceisselectedfromtheInputSelec-
tionmenu,thescreenisblue(nosignalsource).
• Makesuretheselecteddeviceisturnedon.
• BeginplayoftheVCR.
6. DevicesaregrayedoutintheInputSelec-
tionmenuortheSplitScreenInputSelection
menu.
•
Arecordingisinprogress.Canceltherecordingtoselectthedevice.
• Digitalchannels,IEEE1394digitaldevices,andPCscannot
displayintheSplitScreensub-picture.
7.
YouhaveforgottenyourParentalLockpasscode.
SeeAppendixA,BypassingtheParentalLock.
8. Ratingrestrictionsarenotworking. OpentheParentalLockmenuand:
• VerifythattheU.S.RatingsorOtherRatingssettingisOn.
• ChecktheLockTime/UnlockTimetocheckifratingrestric-
tionsaredisabled.
• RatingrestrictionsapplyonlytocontentonANT1andANT2,
INPUT1–3,andIEEE1394inputs.
9. On-screendisplaysappeareachtimeyou
changeafunction.
NormalTVoperation.
10. Cableproviderneedsinformationtostart
CableCARD™service.
Ontheremotecontrol,pressMENUandthenenterthenumbers
999todisplaytheHostIDandCableCARD™IDinformation.
 previous next