Mitsubishi WD-52631 Projection Television User Manual


  Open as PDF
of 108
 
46 Chapter 4. TV Menu Settings
channelsfrommemory,namingchannels,andsaving
favoritechannelsincustommemorybanks.
Note: IfusingaCableCARD™,thecompletelistof
availablechannelsisprovidedthroughthe
CableCARDandtheANT 1optionisgrayedout.
Clock (Setup Menu)
SettheclockifyouwishtousetheTV’sTimerfunction
orscheduledelayedrecordings.Youcanuseeitherthe
manualorautomethodtosettheclock.
Figure 3. Clock submenu
Setting the Clock Manually
Time
Withthehourhighlightedinyellowcharacters,press
repeatedlytoslowlyincrementthehourandassociated
AM/PM indicatororpressandholdtoquicklyincrement
thehour.Press
ENTER
tohighlighttheminutesinyellow.
Press tosettheminutes.
Date
Withthemonthhighlightedinyellowcharacters,press
toselectthecorrectmonth.Press
ENTER
tohighlightthe
day.Press toselectthecorrectday.Press
ENTER
to
highlighttheyear.Press toselectthecurrentyear.
Time Zone
Selectyourcorrecttimezone.Press or toselect
thetimezoneforyourarea(Atlantic, Eastern, Central,
Mountain, Pacific, AlaskaorHawaii).Press tomove
totheDaylight Savingsoption.
Daylight Savings
Press or toselecteitherAppliesorIgnore,depend-
ingonwhetherornotdaylightsavingstimeisusedin
yourarea.
Note:
IfClock SettingissettoManual,eachtimethetime
changeoccurs,youmustopenthismenuandsetthe
TV’sclockaheadorback.
IfyouhaveselectedAutoforClock Setting,theTV’s
clockadjustsautomaticallytodaylightsavingstime.
Setup Menu
Figure 2. Setup menu
Language (Setup Menu)
Choosetodisplaytheon-screenmenusineitherEnglish
orSpanish(Español).
Tolistentoaudioinotherlanguages(whenavailable),see
the“AudioSettings”sectioninthischapterandreferto
“SAP”(analogsignal)or“Language”(digitalsignal).
Memorize Channels (Setup Menu)
For ANT 1/MAIN and ANT 2/AUX
Thememorizationprocessperformstwoscansofall
possiblechannelsontheselected
ANT
input.Analog
channelsarescannedfirst,thentheprocessisrepeated
fordigitalchannels.Channelmemorizationmaytakeup
to15minutestocomplete.
To start channel memorization
1. Highlightaninputselectionbasedonyourconnec-
tions:
Input Condition
Ant1Air,
Ant2Air
Whenconnectedtoanindoor/outdoor
antenna
Ant1Cable,
Ant2Cable
Whenconnectedtodirectcable(no
cablebox)
2. Press
ENTER
tostartautomaticchannelmemorization.
To stop channel memorization before completion
Press
CANCEL
.
Channelsmemorizedbeforeyoupressed
CANCEL
are
retainedinmemory.Ifyourestartmemorization,allprevi-
ouslymemorizedchannelsfortheselectedantennainput
areerasedandtheprocessstartsoverfromthebegin-
ning.
Afterchannelmemorization,press
CH
/ totune
tomemorizedchannels.SelecttheChannelmenufor
furtherchannelediting,suchasaddinganddeleting
 previous next