Filter
Top Products
12
Control Position and Names
For operational instructions, see the page indicated in brackets [ ].
1 POWER switch [26–27]
When POWER switch is pressed to ON, the DVD receiver turns
on.
2 STANDBY indicator [26]
3 Disc tray [36]
When loading a disc, place discs in the disc tray with the label
side facing up.
4 Remote control sensor [9]
Point the remote control toward the remote sensor to operate the
DVD receiver.
5 Display
6 MASTER VOLUME control [32]
The MASTER VOLUME dial is used to control the volume level.
7 0 button [36, 39, 40]
Press to open and close the disc tray.
8 £/8 button [36–37, 39]
Press to start playback. Press again to pause playback, then once
more to resume playback.
9 7 button [37, 40, 41]
Press to stop playback. Pressing once enables playback to resume
from a point shortly before the location where it was stopped.
Pressing twice causes the disc to return to the beginning of the
disc when playback starts again.
0 4/¢, TUNING/PRESET 2/3 buttons [38, 40, 43]
Press to go back or advance to previous chapters/tracks. Also, use
these buttons to change the tuner frequency.
- SURROUND button [27, 46]
Press to select a surround mode.
= INPUT SELECTOR [32, 43]
Press to select the input source other than DVD.
1 Disc indicator [36]
Indicates the type of current disc that is loaded.
2 Source/Listening mode indicators
One of the source indicators lights to show the format of the
current source.
3 TITLE, CHP (Chapter) indicators [47]
Indicate display mode of the current title or chapter of DVD.
4 MEM. (Memory) indicator [44, 56]
5 ST (Stereo), TUNED, AUTO indicators [43]
Indicate the reception mode.
6 REPEAT indicator [47, 52, 60]
Illuminates during repeat playback.
7 A-B indicator [47, 52]
8 FOLDER/TRACK indicator [60]
9 RANDOM indicator [56, 60]
0 £/8 indicators [36]
Lights up in play or pause mode.
- Parental Lock indicator [31]
= Multipurpose display
~ Input/Speaker indicator [33–34, 46]
Front Panel
1
32
56
7
8
9
-
0
=
4
Display
123 45678
9
0
-
=
~
EN00_L-MS30.book Page 12 Tuesday, September 2, 2003 4:19 PM