Onkyo L-MS30 DVD Player User Manual


 
17
Before Connecting
Connect the DVD receiver to the TV or AV component directly. If you connect the DVD receiver to a VCR, TV/VCR combination, or video
selector, the playback picture may be distorted as DVD Video images are copy protected.
This player has 3 kinds of video output jacks.
Video jack connection: Use the supplied Video Connection Cable to connect.
S-Video jack connection: For higher quality video than video jack connection.
Component jack connection: For higher quality video than S-video jack connection.
If your TV has Video Input connector
Using the video connection cable (supplied), make video connection from the MONITOR OUT jack to the corresponding video input jack on
the TV.
When using this type of connection, select S-VIDEO for the VIDEO OUTPUT setting (page 30).
The video signal input from VIDEO1 and VIDEO2 jacks is output from MONITOR OUT jack only.
Note
When using this type of connection, make sure Progressive Output is not set to ON (page 19). If Progressive Output is set to ON, the picture will
not appear on the TV screen.
Connecting to a TV
VIDEO
Video connection cable
(supplied)
EN00_L-MS30.book Page 17 Tuesday, September 2, 2003 4:19 PM