Filter
Top Products
54
Playing VCDs/CDs (Various Playbacks)
CD IntroScan playback
It is possible to play back approx. 10 seconds of the beginning of
each track.
1 During stop mode, press the INTRO button on
the remote controller.
2 Press the “1” button on the remote controller
to select INTRO, then press the ENTER button.
• The first 10 seconds of each track play.
• After IntroScan goes through all of the tracks, it stops.
• When the ENTER button or the INTRO button is pressed
during IntroScan of a track, the unit will return to normal
playback starting with that track.
IntroScan ends when 2 (EXIT) is selected.
VCD IntroScan playback
The VCD IntroScan function has three modes.
1 INTRO: The first approx. 8 seconds of each track will be played
one after another.
2 DISC: The beginning of each of the first nine tracks of the disc
will be played back sequentially and displayed on the screen.
When 4/¢ button is pressed, the next nine screens will be played
back and displayed.
3 TRACK: The selected track will be played back with the screen
display divided into nine parts.
1 During stop mode, press INTRO on the remote
controller.
2 Select 1 (INTRO), 2 (DISC), or 3 (TRACK) with
the numeric buttons of the remote control and
press ENTER.
When “DISC” or “TRACK” is selected, the screen is divided
into nine segments for displaying pictures.
The next nine pictures (nine tracks) will be displayed when
the skip up (¢) button is pressed. When the number of one of
the pictures is selected with the numeric buttons, playback
will start from that picture.
PBC on mode of VCD, the IntroScan function does not work.
Using IntroScan function
VCD
CD
\
1 2 3
8 9 4
7 6 5
EN00_L-MS30.book Page 54 Tuesday, September 2, 2003 4:19 PM